Skip to content
Home » Blog » Top Dealers Talk about 2010 Engines

Top Dealers Talk about 2010 Engines


Engine Smarts by Deborah Lockridge, Editor in Chief

So far, the new engines built to meet the Environmental Protection Agency’s 2010 emissions mandate are performing far better than their EPA-2007 predecessors. That was the consensus of this year’s nominees for the American Truck Dealers/Heavy Duty Trucking Truck Dealer of the Year.

Terry Dotson, president, chairman and CEO of Prestonburg, Ky.-basedWorldwide Equipment Enterprises, puts it bluntly: “2010 engines work. The others that were built in ’07 didn’t. I’m just glad we didn’t make any more of them than we did, because we’re all going to have to worry with those for the next few years.”

Tim Reilly, dealer principal and president of Miami Valley International in Dayton, Ohio, has seen much the same with his company’s lease fleet of nearly 700 units.

“I think with every emissions change, the early engines are in many ways are beta type engines, so you encounter a number of issues, but we’ve seen constant improvement from launch time until today.”

John Arscott, president CEO of The Pete Store in Baltimore, Md., says the 2010 engines are definitely more reliable. “Certainly new technology has problems, but not nearly the magnitude of the previous one,” he says. “We’re seeing a pretty reliable product – which is great, because I felt really bad for some customers.”

Trey J. Mytty, president CEO of Omaha Truck Center, Omaha, Neb., notes that “people are happy with them. It’s an improved product, in my opinion, over the previous engine. I don’t think they run nearly as hot, which is helping with breakdowns, and on the other hand we’re seeing improved fuel economy.”

Brent Leach, president of Custom Truck Sales in Regina, Saskatchewan, Canada, says “from our standpoint, it’s been a good transition. I think the 2007 emissions cycles was rough for everyone. I took some time to work out the bugs. I think the 2010 has gone over with a lot less issues, and reliability with the engines has been quite good.” He says they’ve “seen really good results” with the new Paccar engines.

Challenges remain

That’s not to say there aren’t still some hiccups. Dotson says all the changes in the engines and the affiliated changes in the chassis have meant a lot of new and different parts. When a lot of those are being made offshore, he says, that makes it more difficult to respond rapidly to changes in demand.

Similarly, Reilly said that with the newer engines, as the manufacturers continue to tweak them, some of the parts are actually changing. “So that puts increased pressure on the aftermarket side to be able to stock those things that are new at the plant level.”

Some also commented that while there’s a benefit in being able to plug into today’s computerized engines and be able to have an expert at the OE level help figure out the problem, at the same time, that can lead to delays in repairs.

Steve Bassett, president of General Truck sales, Muncie, Ind., says “the increased technology requires more OEM input to effectively implement repairs, as opposed to the old days when those decisions were made on the shop floor. It’s a plus and a minus at the same time. We have better ability to diagnose the higher tech product we’ve got, but at the same time, those decisions are having to be made through other people in some cases, so it slows the process down.”

While news about better reliability may help persuade customers to buy, it’s hard to get past the sticker shock of trucks with the latest engines, Reilly says, “but we’re starting to get some traction on the truck sales side. We’re looking forward to a very good 2012.”

The company has spent a lot of time in the past couple of years educating customers about the new International MaxxForce engines, he says, including “bringing in some experts from Navistar to help demonstrate it’s not smoke and mirrors.”

The complexity of the trucks also is leading more of MVI’s locally based customers to consider leasing instead of owning, Reilly says.

At General Truck Sales, which sells Volvo and Isuzu, Bassett says EPA-2010 sales were very strong in 2011 and it looks like it’s continuing into 2012. “We’ve seen repeat 2010 engine customers already. We think the improvement in the fuel economy is having an impact on their decision-making process.”

(The ATD/HDT Truck Dealer of the Year will be announced this weekend during the ATD convention in Las Vegas. Watch for a special supplement in the February issue of HDT.)

Printer Friendly Version
Email This Story
RSS
Bookmark and Share

Engine Smarts: Related News

1/31/2012 – Top Dealers Talk about 2010 Engines

So far, the new engines built to meet the Environmental Protection Agency’s 2010 emissions mandate are performing far better than their EPA-2007 predecessors. That was the consensus of this year’s nominees for the American Truck Dealers/Heavy Duty Trucking Truck Dealer of the Year….
More

1/23/2012 – ‘Tall’ gearing and a big engine deliver 12 mpg in a Class 7 truck, expedited-freight hauler claims

“Tall” gearing and a large engine are giving an expedited freight hauler the high fuel economy he sought, even if most factory engineers won’t approve his spec’ing requests….
More

1/10/2012 – Engines: Pistons Still In, But Think Outside the Block

The engine of the future is probably the one under the hood or cab of your current truck….
More

12/21/2011 – Parked Next Door: A Study in Engine Apps


The other day, a remodeling contractor was working at the next-door neighbors’ house and I eyeballed the two trucks that he sent his workers and supplies in….
More